1. This is a cutting list for the fuselage sides

By:           Berkin Peter
Date:         22nd April 2005

	Cutting List for Menestrel - Peter Berkin
	Fuselage Longerons, uprights and diagonals
	All lengths rounded up to nearest 5mm
	16mm X 16mm			16mm X 8mm
	300	x2	600	375	x2	750
	325	x2	650	425	x2	850
	350	x2	700	500	x2	1000
	425	x2	850	575	x2	1150
	475	x4	1900	600	x2	1200
	850	x2	1700	625	x2	1250
	2000	x2	4000	700	x2	1400
	2200	x2	4400	1100	x2	2200
	2500	x2	5000	1350	x2	2700
	4400	x2	8800
Total			28600			12500
Total is approx 28.6 metres 16mmx16mm and 12.5 metres of 16mmx8mm
(Note all items are x2 except the 475mm pieces of 16mm sq which are x4)

This is a cutting List for Fuselage Formers.

By:           Peter Berkin
Date: 	      1st June 2005

Former A
Douglas Fir
16mm x 55mm x 450mm x 2 pieces
16mm x 16mm x 500mm x 2 pieces
16mm x 8mm x 800 x 2 pieces
25mm x 100mm x 350mm x 4 pieces
Ash
16mm x 50mm x 80mm x 2 pieces
16mm x 50mm x 120mm x 2 pieces
1.5mm ply cut from sheet (see sep. list)
Former B
Douglas Fir
16mm x 40mm x 900mm x 1 piece
16mm x 8mm x 30mm x 2 pieces
Ash
16mm x 75mm x 500mm x 2 pieces
Marine Ply
25mm x  175mm x 175mm min square 1 piece
(Could use 10mm and 15mm laminated)
2.5mm ply cut from sheet (see sep. ply list)
Former C
Douglas Fir
16mm x 24mm x 1050mm x 2 pieces
16mm x 16mm x 435mm x 4 pieces
16mm x 8mm x 400mm x 1 piece
Ash
16mm x 40mm x 70mm
2.5mm ply and 2mm ply cut from sheets